Struers Discotom-50, Instruction Manual

Page: 38 / 156

Discotom-50
Instruction Manual
„
Fasten the black handle to stop the cutting handle from
moving.
Changing the Cut-off Wheel
„
Press the black locking knob on the right-hand side of the cut-
off wheel, turning the cut-off wheel until the spindle lock
clicks.
„
Remove the nut with a fork spanner. Remove the flange and
the old cut-off wheel.
„
Mount the new cut-off wheel.
„
Mount the flange and the nut. Tighten carefully.
„
Pull out the flush hose from the front of the machine.
Flushing the Cutting Chamber
„
Point the flush hose towards the bottom of the cutting
chamber.
„
Turn the cooling valve clockwise to flushing position.
„
Clean the cutting chamber.
„
Turn the cooling valve counter-clockwise to cooling position.
„
Always leave the protection guard open to let the cutting
chamber dry.
34