Struers Discotom-50, Instruction Manual

Page: 19 / 156

Discotom-50
Instruction Manual
Discotom-50 is supplied with an automatic feature, allowing you
to pre-program a specific stop position. Programmable Stop
„
Position the cutting table at the desired stop position using the
FORWARDS
v
and BACKWARDS
V
keys.
„
Set the stop position by pressing the STOP
o
key and holding
it down whilst activating the FORWARDS
v
key.
„
Use BACKWARDS
V
to move the cutting table clear of the cut-
off wheel. Place and clamp the workpiece and press START
s
.
„
The cutting table stops when it reaches the pre-set stop
position and the cutting table moves to the position from where
cutting was started.
Cancelling the Programmable
Stop
„
Cancel the stop position by pressing the STOP
o
key and
holding it down whilst activating the BACKWARDS
V
key.
Note
The stop position will also be cancelled when the machine is switched off.
15