Discotom-50
Instruction Manual
The corresponding feed speed setting depends on the sample size;
please refer to the graph below.
Feed Speed
Recommended Settings,
Feed Speed
To use the graph, find the maximum diameter of your workpiece
on the x-axis, then move upwards to the curve relevant to your
material. Then move left to the y-axis to the corresponding feed
speed.
53UNI
Feed Speed Settings using 53UNI cut-off wheel
0
0,2
0,4
0,6
0,8
1
1,2
1,4
1,6
1,8
2
50
55
60
65
70
75
80
85
90
Sample Diameter [mm]
Feed Speed [
mm/s]
1. Soft ferrous metals
2. Medium soft ferrous metals
3. Medium hard ferrous metals
4. Very hard ferrous metals
5. Very ductile metals
Cut-off wheel recommendations
53UNI is recommended for all-round cutting of materials <800 HV.
51UNI is recommended for all-round cutting of materials >800 HV.
Note
: Some materials cannot be cut using the 53UNI
universal cut-off wheel; for example Titanium.
For extremely hard materials (>1000HV), manual cutting is recommended.
Important
Always adapt
both
rotational speed
and
feed speed
to a different type for material.
17
Summary of Contents for Discotom-50
