Struers Discotom-50, Instruction Manual

Page: 34 / 156

Discotom-50
Instruction Manual
The stainless steel bands are available as spare parts and should
be replaced if they become worn or damaged.
Maintenance of Cutting Table
Maintenance of Cut-off Wheels
Bakelite bonded cut-off wheels are sensitive to humidity.
Therefore, do not mix new, dry cut-off wheels with used humid
ones. Store the cut-off wheels in a dry place, horizontally on a
plane support. Storing Bakelite Bonded Al
2
O
3
Cut-off Wheels
The precision of diamond and CBN cut-off wheels (and thus the
quality of the cut) depends on how carefully the following
instructions are observed:
Maintenance of Diamond and
CBN Cut-off Wheels
„
Never expose the cut-off wheel to a heavy mechanical load, or
heat.
„
Store the cut-off wheel in a dry place, horizontally on a plane
support, preferably under light pressure.
„
A clean and dry cut-off wheel does not corrode. Therefore, clean
and dry the cut-off wheel before storing. If possible, use
ordinary detergents for the cleaning.
„
Regular dressing of the cut-off wheel is also part of the general
maintenance.
Maintenance of
Clamping Devices
Important
It is recommended to thoroughly clean and lubricate the
Quick Clamping Device and Vertical Clamping Device at regular intervals.
30