PART 1
z
English
23
LNB Power:
Select 13/18V, 13V or 18V for LNB. Select “
Off
” if you want to switch the
power of the LNB off.
LNB Dish:
Using the
LEFT/RIGHT
buttons, select “
Fixed
”, “
Moved
” or “
GOTO X”
Dish.
The meanings are: fixed installed dish, Motorized dish and a GOTO X ready motor. If
you use a motorised dish, read the “
Positioner Set-up
” (Described in section 5.1.4.3.1).
DiSEqC switch:
The default is Off. To use the DiSEqC switch, set up the DiSEqC version
you have (V1.0 or V1.1).
DiSEqC Input:
Select position 1~4 if DiSEqC switch is DiSEqC V1.0. Select position 1~16
if DiSEqC switch is DiSEqC V1.1.
DiSEqC Repeat:
Designate the repeat of switching. (0 ~ 3)
Switch 22 kHz:
You can set the 0/22 kHz switch to ON or OFF.
Tip:
If you set “
LNB type
” to “
Universal
” (UNI1 ~ UNI3), you will not be able to change settings in
both the “
LNB Power
” menu item and the “
Switch 22 kHz
” menu item. If you want to change
any of these two settings you must set “
LNB type
” to zero. If DiSEqC switch is Off, you will not
be able to change settings in both the “
DiSEqC Input
” and “
DiSEqC Repeat
” menu items.
Alternatively if you set LNB Dish to “
Moved
”, the DiSEqC switch menu item is automatically
switched to off if your “
LNB dish
” is set to “
fixed
” you will be able to select the required DiSEqC
level in the DiSEqC switch menu item.
6. Press the
RED
(
Save
) button or press the
GREEN
(
Save &Exit
) button to save the setting
and to return to the installation menu.
7. Press the
YELLOW
(
Back
) button or
BACK
button if you don't want to save the setting.
5.1.4.4 Channel Set-up
(Please see inside cover Screen 20)
The channel set-up is for downloading the channels available on the satellites. There are up to 64
satellites available. To download channels, please apply the following steps (In this menu, you can edit
the satellites name, and edit the transponder of the satellite. You can also display the LNB menu and
the Positioner Set-up menu by selecting LNB and Dish Position respectively.):
1.Press the
MENU
button.
2. Using
UP/DOWN
keys on your remote, select "
Installation
" and press
OK
.
3. Using
UP/DOWN
keys, select "
Channel Set-up
" and press
OK
.
