PART 1
z
English
21
System Information:
The system information displays information about your receiver
such as Hardware number, software and boot version. To check system information,
apply the following steps:
1. Select “
System information
” and press
OK
or the Right button. (Please see inside
cover Screen 18)
2. Use the
BACK
button to return back to the “
System information
” menu.
Factory Reset:
Be careful when using this function, because it will erase all the data and
parameters you may have set earlier to your receiver. Once you have made a Factory
Reset you will have to re-install your preferences and re-scan your channels. To reset
your receiver to factory default, apply the following steps:
1. Select “
Factory Reset
” and press
OK
.
2. Enter your PIN Code. The receiver will reset itself to the original factory settings.
Note:
Your PIN code will change back to the factory setting “0000”.
5.1.4.2 GOTO X settings
This convenient function you can use once you have installed a DiSEqC 1.2 motor to move your dish
between the different satellites. Once you switch between channels coming from different satellites, the
dish will automatically move with the help of the GOTO X commands to the applicable satellite.
In Order to correctly set-up the GOTO X functions you will need to know you geographical longitude
and latitude. Make sure that the dish is correctly installed, the “0” position of the dish should be exactly
positioned at South. If you are not sure about the correct positioning of your dish, ask your Strong
dealer to check it for you.
1. Geographical position:
Once you know the exact geographical position of your city (for example Hamburg:
53.33° North and 9,59° East), you can enter the values (In this case 053,3 North and
009,6 East) directly in the GOTO X menu.
Note:
The Receiver will not be able to move the dish in the correct position if the values that you
enter are incorrect.
