PART 1
z
English
7
1.4 Storage
Your receiver and its accessories are stored and delivered in a well protective packaging against electric
shocks and moisture. When unpacking it, make sure that all the parts are included and keep packaging
away from children. When transporting the receiver from one place to another or if you are returning it
under warranty make sure to store the receiver in its original packaging with its accessories. Failing to
comply with such packaging procedures could void your warranty.
1.5 Equipment Set-up
We recommend you to consult a professional installer to set up your equipment. Otherwise, please
follow the following instructions:
Refer to the user manual of your TV and dish;
Make sure that the SCART cable is in a good condition;
Make sure that the SCART cable connections are well shielded;
Make sure that the outdoor components of the dish are in good condition;
Make sure that the dish is aimed at the satellite of your choice;
Make sure that the dish is connected with the correct R.F. coaxial cable (75 Ohm) and is in
good condition.
2.0 Your Receiver
2.1 Front Panel (Please see inside cover Figure 1)
1. Power Button
Turns the receiver ON/Standby
2. Stand-BY/ ON/ SIGNAL (3 LEDs)
The red LED is the “stand-by” indicator. The green LED is the “Power On” indicator.
The orange LED lights up once you correctly receive a satellite signal (signal locked).
3. UP/DOWN Buttons
Move the cursor
UP/DOWN
in Menu state. Changes the channels
UP/DOWN
in no menu state.
4. LED Display
This 4-digit LED panel indicates the time, programme number or play function.
