Stove Builder International VB00003, Installation And Operation Manual

Page: 66 / 92

66
HE200 - Installation and Operation Manual
The hot air gravity distribution kit - traditional must be installed respecting the following:
1. It is recommended to wear gloves to perform this procedure. Remove the plates closing up the 8" dia.
holes on top of the fireplace. Then, cut and remove the insulation in order to obtain two 8" dia.
openings. Then, remove the plates closing up the 8" dia. holes inside the fireplace.
2.
Secure the 6 steel brackets (B) with 6 screws provided (C) on top of the fireplace (3 for each ducting).
Insert the ducting (A) (not provided) into each opening and secure it in place using the steel brackets (B)
installed previously with 6 other self-tapping screws provided (C).