Superior WCT3042RH Installation And Operation Instructions Manual Download Page 1

Page: 1 / 20

For more information, visit Superiorfireplaces.US.com

Pro Series

Wood burning Fireplaces

MODELS

INSTALLATION AND OPERATION

INSTRUCTIONS

P/N 126622-01 Rev. D 10/2014

REPORT NO. 10-078

P126622 01

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

This book is valuable. In addition to instructing you

on how to install and maintain your appliance, it also

contains information that will enable you to obtain

replacement parts or accessory items when needed.

Keep it with your other important papers.

This fireplace is approved for use as a wood burning

fireplace or for use with a vented gas log approved

to ANS Z21.60, Z21.84 standards or for use with a

vent-free gas log heater approved to ANS Z21.11.2

standard. An INNOVATIVE HEARTH PRODUCTS, LLC

hood must be installed when using a vent-free log

heater (see Accessories, page 18).

This wood burning fireplace complies with UL127-

CAN/ULC-S610-M87 standard as a FACTORY BUILT

APPLIANCE.

FOR CANADA: The authority having jurisdiction

(such as the municipal building department, fire

department, etc.) should be contacted before instal-

lation to determine the need to obtain a permit.

INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.

PFS

WRT3042WS

WRT3042WSI

WRT3042WH

WRT3042RS

WRT3042RSI

WRT3042RH

WCT3042WS

WCT3042WSI

WCT3042WH

WCT3042RS

WCT3042RSI

WCT3042RH

Summary of Contents for WCT3042RH





















Search results

Summary of Contents for WCT3042RH

Reviews:

Related manuals for WCT3042RH

Brands by name

Popular brands

Superior WCT3042RH, Installation And Operation Instructions Manual

Search results

Summary of Contents for WCT3042RH

Reviews:

Related manuals for WCT3042RH

Brands by name

Popular brands