StorageTek Host Software Component 6.0, System Programmer'S Manual

Page: 50 / 718

20 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
• automatic cleaning of tape transports with cleaning cartridges under the control of
the HSC and the library
• restricting the write access to volumes in the library through the Virtual Thumbwheel
feature
• dual LMU support
• control data set recovery.
Facilities Available for User Control of HSC Functions
There are facilities available for system programmers and operators to use to control
various system functions. These include:
• macros
• utilities
• PARMLIB control statements
• operator commands.
Installation Functions
Installation functions pertain to installation or reconfiguration processing for the HSC
subsystem. Since these topics are extensive, they are presented in a separate document.
The
HSC Installation Guide presents detailed information about installation planning and
instructions, including:
• Planning the configuration
• Performing preinstallation procedures
• Installing HSC software
• Defining the library configuration (LIBGEN)
• Defining PARMLIB control statements
• Initializing the control data sets
• Verifying library generation
• Starting HSC execution
• Testing the installation
• Planning and executing cartridge migration into the library
• Migration planning
• Performing library modifications.