StorageTek Host Software Component 6.0, System Programmer'S Manual

Page: 428 / 718

398 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
FIND
FIND is identical to the VIEW command, except that only the address of the found
structure is displayed. It is useful when following pointer chains to a structure. It is
especially useful when analyzing a dump over a slow communications line.
EX (EXECUTE CMS COMMAND)
This subcommand executes any CMS command in subset mode.
EX token token .....
TRB (SAVE AREA TRACEBACK)
The TRB subcommand displays register save areas. The traceback starts from the current
R13 contents, an explicit address, or the contents of a named field in the SCP structure last
VIEWed.
TRB
TRB label ­ name
TRB address
TTE (TRACE TABLE ENTRY)
The TTE subcommand displays one trace table entry (TTE). The first time ‘‘TTE’’ (with
no parameter) is invoked, the last (current) TTE is displayed. Subsequent invocations
‘‘walk back in time,’’ one step at a time.
TTE Previous TTE entry
TTE B Previous TTE entry
TTE F Next TTE entry
TTE N Next TTE entry
TTE R Reset to current
PSW
The PSW subcommand displays the PSW at time of the VMDUMP.
PSW