StorageTek Host Software Component 6.0, System Programmer'S Manual

Page: 250 / 718

220 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
This example specifies BACKup with the SLSCNTL statement to identify the primary
control data set. Backup is processed without a secondary control data set and journals.
JCL for Backup of the Primary CDS without Secondary and Journals
Output Description
Output resulting from the execution of the BACKup utility includes:
• the following data sets:
- backup of the library control data set
- copies of the primary and secondary control data sets
- reset of the control data set journals.
• a listing of input commands with appropriate messages when syntax errors occur
• messages associated with backup processing
Note: These messages may include error conditions.
• an ‘‘Errant and In-transit Location Report’’ (refer to Figure 11 on page 222)
Note: This report is normal. In-transit and possibly errant VOLSERs are normal
when the HSC is active.
• a ‘‘Block Processing Report’’ and a “Block Record Element Discrepancy Report,”
which may include reports of mismatches between the primary and secondary CDS
(refer to Figure 11 on page 222)
Note: Unselect cards may be generated during a good backup of a primary and
secondary CDS that match.
/JOB jobname SLUADMIN
/PARM MIXED
/FILE SLSBKUP DEV vaddr DSN backup.set.name
/FILE SLSCNTL DEV vaddr DSN primary.set.name
/FILE SLSPRINT DEV PRNT CLASS A
/FILE SLSIN *
BACKUP
Backup