StorageTek Host Software Component 6.0, System Programmer'S Manual

Page: 322 / 718

292 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
JCL Requirements
The following definitions apply to Scratch Redistribution utility JCL:
SLSPRINT
output messages from the utility.
SLSIN
input to the utility in the form of control statement card images.
Invoking the Scratch Redistribution Utility
The easiest way to run utilities is to execute the ACS UTIL exec by entering the following
command:
EXEC ACS UTIL SCREDIST
Execution of the statement results in the ACSUTIL SLKJCL file:
ACSUTIL SLKJCL File
To execute the utility:
1. Delete the lines in the template that are not required, or leave the comment indicator
(*) in column one.
2. Remove the comment indicator from the desired lines.
3. Specify values for the desired parameters.
4. Delete the parameters that are not desired.
5. Enter the command ‘‘FILE.’’
The job file is then submitted to the ACS service machine for execution.
JCL Examples
The following example shows JCL for redistributing scratch volumes within all LSMs in
an ACS.
/JOB jobname SLUADMIN
/PARM MIXED
/FILE SLSPRINT DEV PRNT CLASS A
/FILE SLSIN *
* SCREDIST ACS(acsid) LSM(lsm ­ list)
Scratch Redistribution