StorageTek Host Software Component 6.0, System Programmer'S Manual

Page: 214 / 718

184 VM/HSC 6.0 System Programmer’s Guide
1st ed., 6/30/04 - 312579601
Note: The DATE parameter does not control report header date formats, which are
displayed as yyyy-mm-dd . See Figure 9 on page 197 for an example of this format.
Example
Several JCL examples using the options for report headings follow:
Example of JCL Using Report Heading Options
DATE=2YR Specifies that all dates displayed in report detail lines are in
the ‘‘ mm / dd / yy ’’ format. A yy value of 71 or greater
indicates a 20th century (19 xx ) date. A yy value of 70 or
less indicates a 21st century (20 xx ) date. To avoid
confusion, you are encouraged to use the DATE=4YR
parameter setting described below.
DATE=4YR Specifies that all dates displayed in report detail lines are in
the ‘‘ yyyymmdd ’’ format. This is the default.
//STEP1 EXEC PGM=SLUADMIN,PARM=‘NOHDR,MIXED’
//STEP1 EXEC PGM=SLUADMIN,PARM=‘LINECNT=55’
//STEP1 EXEC PGM=SLUADMIN,PARM=‘MIXED’
//STEP1 EXEC PGM=SLUADMIN,PARM=‘DATE=4YR’