25
2.6
Installing and removing a SIM card
The S7 series handhelds are equipped with a cellular modem. To use the integrated modem,
the 2G edition handhelds require a SIM card.
Note:
The SIM card and its contents can be easily damaged by scratches or bending.
Note:
The presence of any dust or moisture in the SIM card slot may adversely affect the
device and void your STONEX warranty. To prevent dust or moisture entering the SIM card
slot:
-
Make certain that the SIM card slot door is attached correctly when you are using the
handheld outdoors.
-
When inserting or removing a SIM card, place the handheld on a dust-free indoor
surface.
Note:
Static electricity can harm electronic components inside the handheld. To prevent
static damage, discharge static electricity from your body before you touch any of the
electronic components inside your device, such as a memory module. You can do so by
touching an unpainted metal surface.
To insert a SIM card:
1. Turn off the handheld.
2. Place the handheld on a dust-free indoor surface.
3. Flip open the SIM card slot door on the side of the handheld.
4. Insert the card into the SIM card slot with the gold contacts facing down.
Gently press the card until you hear a click, and the card is locked into place.
5. Close the SIM card slot door.
To remove the SIM card:
1. Follow steps 1 to 3 above.
2. Gently press the card in and then let go. The card pops out.
3. Gently slide the card out of the slot.
2.7 Fitting the hand strap
The hand strap and screws are provided in the box with the handheld. To fit the hand strap:
1. Align the upper hand strap bracket with the two mounting holes and then use a
screwdriver to tighten the screws.
2. Stretch the hand strap to align the bottom hand strap bracket with the mounting
hole and then use a screwdriver to tighten the screw.
