Stoll CMS ADF-3 Operating Instructions Manual Download Page 431

Page: 431 / 444

431

Machine Management Tools

10.3 Remote control with the software VNC



The "VNC Viewer: Connection Details" window opens.



"VNC Viewer: Connection Details" window

5. In order that all colors are displayed, activate the "Full (all available

colours)" option on the "Encoding and Colour Level:".

6. In order to activate the mouse pointer alternative, deactivate the "View

only (ignore mouse & keyboard)" check box under "Inputs".

7. Click "OK".



The user interface of the machine is opened in the web browser and can
now be operated from here.



Display of user interface of the machine in the "Java applet" window

The machine can be operated through the user interface of
the machine or in the "Java applet" window simultaneously.

Summary of Contents for CMS ADF-3





























































































































































































































































































































































































































































Search results

Summary of Contents for CMS ADF-3

Reviews:

Related manuals for CMS ADF-3

Brands by name

Popular brands

Stoll CMS ADF-3, Operating Instructions Manual

Search results

Summary of Contents for CMS ADF-3

Reviews:

Related manuals for CMS ADF-3

Brands by name

Popular brands