Stoll CMS ADF-3, Operating Instructions Manual

Page: 103 / 444

103
3
Producing with the knitting machine
3.5 Eliminating errors in the fabric
9. Pull the engaging rod upward cautiously.

The yarn carriers move automatically back into their knitting
position.
10. If the yarn carriers are in their knitting position, the carriage starts
moving and inserts the thread in the needles.
11. When the thread is inserted securely in the needles, release the
engaging rod.

The carriage stops.
12. Release the yarn end and close the covers.
13. Keep moving the carriage until the reversing position is reached and
stop it.
14. Remove the yarn end.
15. Continue the production or begin a new fabric.
DANGER
The yarn carrier moves back into its knitting position!
Danger of crushing and cutting by the autarkic yarn carriers.

The yarn carriers that were moved will automatically
move back into their knitting position.
➜
Do not reach in the area of the yarn carriers.
➜
Carefully pull the engaging rod only a little bit upward.