Stoll CMS ADF-3 Operating Instructions Manual Download Page 15

Page: 15 / 444

About this document

1.5 Warnings in the documentation

The warnings in the documentation have the following structure:



Safety sign (display the danger of injury)



Signal word (DANGER, WARNING, CAUTION, IMPORTANT)



Text comprises of:

–

Type and source of danger

–

Possible outcomes

–

Measures for protection against danger and prohibitions

Example:

DANGER

Life-threatening high voltage!

Electrical shock may cause death or serious injuries.

➜

Set machine main switch to "0".

➜

Secure the machine against being switched on again.

Signal word

Explanation

Imminent danger of death or serious injuries
(irreversible).

Death of serious injury (irreversible) possible.

Slight injury (reversible) possible.

Damage to property possible.

Explanation to the signal words

Summary of Contents for CMS ADF-3





























































































































































































































































































































































































































































Search results

Summary of Contents for CMS ADF-3

Reviews:

Related manuals for CMS ADF-3

Brands by name

Popular brands

Stoll CMS ADF-3, Operating Instructions Manual

Search results

Summary of Contents for CMS ADF-3

Reviews:

Related manuals for CMS ADF-3

Brands by name

Popular brands