27
Stille imagiQ2
TM
service manual Technical
Technic
al
To replace Wheel cylinder
1)
If possible place the table in position for service according to instruction,
minimum try to elevate the table top to the highest position, lock the wheels.
2)
Remove the emergency cover, the lowest column cover, the front cover
and then the protective plate under the covers.
3)
Perform a hydraulic and electric LoTo according to the instruction to
remove any stored energy in the system.
4)
Place some paper towels under the hoses and then carefully untighten the
hoses, some amount of oil will come from the hoses, wait until it stops (a couple
of seconds) if oil with high pressure is flowing from the hoses, check that the
LoTo is correct performed.
5)
Remove the cylinder.
6)
Mount the new cylinder.
7)
All hydraulic washers must be replaced and tighten with the correct
torque (12Nm) all other connectors shall be tightened finger tight and then
minimum 3/4 turns.
8)
Restore the power according to the LoTo procedure.
9)
Inspect and refill the oil level
10)
Reinstall all parts.