Still R70-40T, Operating Instructions Manual

Page: 67 / 288

Operation
5
Checks and operations prior to start-up
7090_341-002
1
2
Filling the washer system
– Open the sealing cap (1).
– Fill the washer reservoir (2) with windscreen
washer fluid.
CAUTION
If there is no anti-freeze in the system, the washer
system (special equipment) may be damaged.
– Always use windscreen washer fluid with anti-
freeze.
– Fill the reservoir completely with clean wa-
ter.
– Close the sealing cap (1).
– Operate the washer system until washer
fluid exits from the spray nozzles.
7071_003-043
2
1
Checking the condition of the wheels
and tyres
WARNING
Risk of accident! With uneven wear or incorrect air
pressure, the stability of the forklift truck decreases
and the braking distance increases.
Renew left and right worn or damaged tyres without
delay.
NOTE
•
Only permissible tyre types may be
used, see ⇒ Chapter "Wheels and ty-
res", P. 7-252.
– Check tyres (1) for wear or damage.
Tyres cannot be damaged or worn. They must
be worn evenly on both sides.
– Check air pressure. The air pressure given
on the stickers (2) must be observed.
NOTE
Note the safety principles for tyres, see
⇒ Chapter "Tyres", P. 3-25.
171673 [EN] 57