Still R70-40T, Operating Instructions Manual

Page: 233 / 288

Maintenance
6
1000-hour maintenance/annual maintenance
1000-hour maintenance/annual maintenance
Work that must also be carried out
– Carry out maintenance work as neces-
sary, see ⇒ Chapter "Maintenance as re-
quired", P. 200.
– Carry out 500-hour maintenance,
see ⇒ Chapter "500-hour mainte-
nance/semi-annual maintenance", P. 222.
Maintainance of drive axle
7071_003-076
1
2
Drive axle, checking oil level
WARNING
Consumables are toxic!
Observe the safety regulations for
handling brake fluid,see ⇒ Chap-
ter "Oils", P. 3-29.
– Park the forklift on a level surface.
– Unscrew the checking (1)screw.
The oil level must reach the lower edge of the
bore.
– Unscrew the filling plug, if necessary, (2)
and fill with oil as per the maintenance data
table; see ⇒ Chapter "Maintenance data
table", P. 6-186 until it escapes from the
hole for the checking screw (1).
– Renew the sealing ring on the oil drain plug
(1).
– Tighten the oil checking screw (1) with a
torque of 10 Nm.
– Renew the sealing ring on the oil drain plug
(2).
– Tighten the oil drain plug (2) with a torque of
24 Nm.
– Check the oil level at both wheel drives.
Checking the drive axle for leaks
– Inspect the power unit for leaks (traces of
oil).
171673 [EN] 223