Still R70-40T Operating Instructions Manual Download

Page: 154 / 288

Operation

Error messages

– Remove the seat belt from the buckle, fit the

belt in line with the instructions and fasten it

again.

The forklift truck can again be operated with-

out restriction.

6327_342-005

SICHERHEITSGURT

The seat belt is unfastened while driving

– If you release the belt while driving, the

message

SAFETY BELT

appears in the

display.

The truck maintains or brakes to a slow speed.

DANGER

This function does not release you from your duty

of care, to adjust the speed of the forklift truck to the

driving situation.
The increased safety provided by this function may

not be misused in order to take safety risks.

7090_342-009

– Fit the seat belt in line with the instructions

and fasten it.

The forklift truck can again be operated with-

out restriction.

144

171673 [EN]

Summary of Contents for R70-40T

































































































































































































































































































Search results

Summary of Contents for R70-40T

Reviews:

Related manuals for R70-40T

Brands by name

Popular brands

Still R70-40T, Operating Instructions Manual

Search results

Summary of Contents for R70-40T

Reviews:

Related manuals for R70-40T

Brands by name

Popular brands