Still R70-40T Operating Instructions Manual Download Page 234

Page: 234 / 288

Maintenance

1000-hour maintenance/annual maintenance

7071_003-077

Adjusting the parking brake

– Open the bonnet; see ⇒ Chapter "Opening

the bonnet", P. 5-55.

– Adjust the parking brake switch (2) so that

traction drive is switched off (1) when the

parking brake control cable is pulled.

– Close the motor hood.

Lubricating the parking brake lever

bearing and ratchet

– Lightly lubricate the parking brake lever

bearing and ratchet according to the main-

tenance data table . See ⇒ Chapter "Main-

tenance data table", P. 6-186appears on

the display.

Checking the counterweight attach-

ment

– Check the mounting screws of the counter-

weight on the frame to make sure they are

secure.

Changing the engine oil and filter

– Open the bonnet; see ⇒ Chapter "Opening

the bonnet", P. 5-55.

WARNING

Consumables are toxic!
Observe the safety regulations for

handling engine oil,see ⇒ Chap-

ter "Oils", P. 3-29.

224

171673 [EN]

Summary of Contents for R70-40T

































































































































































































































































































Search results

Summary of Contents for R70-40T

Reviews:

Brands by name

Popular brands

Still R70-40T, Operating Instructions Manual

Search results

Summary of Contents for R70-40T

Reviews:

Brands by name

Popular brands