Still R70-40T Operating Instructions Manual Download Page 250

Page: 250 / 288

Maintenance

6000-hour maintenance

7311_003-028

– Place a suitable collection vessel under the

oil drain plug (2).

– Unscrew the hydraulic oil drain plug (2)

underneath the hydraulic oil tank and allow

the oil to drain out completely.

ENVIRONMENT NOTE

Dispose of used oil according to applicable

regulations.

– Screw the drain plug (2) back in together

with a new seal and tighten it.

7071_003-119

– Pull the old filter insert (3) off the filter cover

(1) and dispose of it in accordance with

applicable regulations.

– Place the new filter insert (3) on the filter

cover and screw the filter cover (1) back on.

– Tighten the filter cover; for tightening

torque see ⇒ Chapter "Ma intenance data

table", P. 6-186.

240

171673 [EN]

Summary of Contents for R70-40T

































































































































































































































































































Search results

Summary of Contents for R70-40T

Reviews:

Brands by name

Popular brands

Still R70-40T, Operating Instructions Manual

Search results

Summary of Contents for R70-40T

Reviews:

Brands by name

Popular brands