Still R70-40T Operating Instructions Manual Download Page 237

Page: 237 / 288

Maintenance

1000-hour maintenance/annual maintenance

7081_003-022

Replacing the spark plugs

– Open the bonnet; see ⇒ Chapter "Opening

the bonnet", P. 5-55.

– Disconnect the spark plug (1) connectors.
– Unscrew the spark plugs.
– Fit new spark plugs according to mainte-

nance data table, see ⇒ Chapter "Mainte-

nance data table", P. 6 -186.

– Close the bonnet.

Checking the exhaust gas system

– Inspect the exhaust gas system for external

damage, secure fit, and leaks.

7311_003-036

Changing the LPG filter

DANGER

There is a risk of explosion if LPG

escapes.
– Note safety regulations for

working with LPG ⇒ Chap-

ter "LPG", P. 3-30.

– Stop the engine.
– For trucks with LPG cylinders, close the

cylinder valve (1).

171673 [EN]

227

Summary of Contents for R70-40T

































































































































































































































































































Search results

Summary of Contents for R70-40T

Reviews:

Brands by name

Popular brands

Still R70-40T, Operating Instructions Manual

Search results

Summary of Contents for R70-40T

Reviews:

Brands by name

Popular brands