Still R70-40T Operating Instructions Manual Download

Page: 183 / 288

Operation

Shut-down

7071_003-111

Inserting a wheel chock

The wheel chock (special equipment) serves,

among other things, to prevent the forklift truck

from rolling away on a slope.
– Lift the handle (4) on the support mounting.
– Remove the wheel chock (5) from the sup-

port mounting.

– Place the wheel chock on the downhill side

behind a wheel on the front axle.

NOTE

After using, return the wheel chock to the sup-

port mounting and press the handle (4) down

again.

Measures for prolonged shutdown,

storage of truck

If the truck is to be stored for a prolonged time,

the following measures must be taken to pro-

tect against corrosion.
If the truck is to be shut down for more than two

months, it must be parked in a clean and dry

area. The area should also be well ventilated

and frost free. The following additional mea-

sures must be taken:

Measures before shutdown

– Clean truck thoroughly; see ⇒ Chap-

ter "Cleaning", P. 196.

– Lift fork carriage to full extent several times.
– Tilt the mast forwards and backwards sev-

eral times and, if fitted, move attachments

repeatedly.

– To relieve the strain on the load chains,

lower forks onto a suitable supporting sur-

face e. g. a pallet.

– Check the hydraulic oil level and refill as

needed; see ⇒ Chapter "Maintaining hy-

draulic equipment", P. 6-207.

– Apply oil or grease thinly to all uninsulated

moving parts; see ⇒ Chapter "Lubricating

joints and controls", P. 6-211.

171673 [EN]

173

Summary of Contents for R70-40T

































































































































































































































































































Search results

Summary of Contents for R70-40T

Reviews:

Related manuals for R70-40T

Brands by name

Popular brands

Still R70-40T, Operating Instructions Manual

Search results

Summary of Contents for R70-40T

Reviews:

Related manuals for R70-40T

Brands by name

Popular brands