TS 800
English
20
Checking the adjustment range of the
guard
N
Rotate the guard forwards and
backwards as far as possible –
adjustment range (A) must be
limited by the stop pin
Continue as described in the chapter
“Tensioning the ribbed V-belt”.
This machine is equipped with an
automatic spring-action V
-
belt
tensioning device.
Prior to tensioning of the ribbed V-belt,
the nuts (1) must be loosened and the
arrow on the tensioning nut (2) must
point to 0.
N
otherwise loosen the nuts (1) and
the tensioning nut (2) with the
combination wrench
counterclockwise –
approx. 1/4 turn, as far as
possible = 0
N
to tighten the ribbed V-belt, fit the
combination wrench over the
tensioning nut as illustrated
WARNING
The tensioning nut is spring-loaded –
hold the combination wrench securely.
N
Turn the tensioning nut clockwise
approx. 1/8 turn – the tensioning nut
will be engaged by the spring
N
Continue turning approx. 1/8 turn –
up to the stop
NOTICE
Do not turn the combination wrench
further by force.
The ribbed V
-
belt is automatically
tensioned by the force of the spring in
this position.
N
Remove the combination wrench
from the tensioning nut
N
Tighten nuts (1) on the V-belt guard
Retensioning the poly ribbed V
-
belt
The poly V
-
belt is retensioned without
the aid of the tensioning nut.
N
Unscrew the three nuts on the V-
belt guard
The poly V
-
belt is automatically
tensioned by the force of the spring.
N
Retighten the nuts
A
377BA010 KN
Tensioning the ribbed V
-
belt
1
1
1
2
376BA094 KN
1
1
1
376BA095 KN
