![background image](http://html1.mh-extra.com/html/stihl/cutquik-ts-800/cutquik-ts-800_instruction-manual_1379049026.webp)
TS 800
English
24
Opening the filler cap
N
Press the filler cap down as far as
possible by hand, then turn it
counterclockwise (approx. 1/8 turn)
and remove
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank. STIHL
recommends use of the STIHL filling
system for fuel (special accessory).
Closing the filler cap
N
Fit the cap and turn it until it
engages in the bayonet catch
N
Press the cap down as far as
possible with your hand and turn it
clockwise (approx. 1/8 of a turn)
until it engages properly
Change the fuel pick-up body every year
N
Drain the fuel tank
N
Pull the fuel pick-up body out of the
tank with a hook and disconnect it
from the hose
N
Connect a new fuel pick-up body to
the hose
N
Return the fuel pick-up body to the
tank
N
Note the safety instructions. Refer
to the chapter headed "Safety
precautions and working
techniques".
N
Press throttle trigger lockout (1) and
throttle trigger (2) simultaneously
N
Hold both triggers down
N
Move the master control lever (3) to
START and hold it in position too
N
Release the throttle trigger, master
control lever and throttle trigger
lockout in succession = starting
throttle position
Starting / Stopping the
Engine