TS 800
English
16
Troubleshooting
Abrasive wheel
Error
Cause
Remedy
ragged edges or cut surfaces, crooked
cut
Deviation in radial or axial run-out
Contact a servicing dealer
1)
heavy wear on the sides of the segments Abrasive wheel gyrates
use a new abrasive wheel
ragged edges, crooked cut, no cutting
performance, generation of sparks
Abrasive wheel is dull; built-up edges with
abrasive wheels for stone
Sharpen abrasive wheels for stone by
briefly cutting through abrasive materials;
replace abrasive wheel for asphalt with a
new one
poor cutting performance, high segment
wear
Abrasive wheel is turning in the wrong
direction
Mount abrasive wheel so that it turns in
the right direction
Breakdowns or tears in the parent wheel
and segment
Overloading
use a new abrasive wheel
Undercut
Cutting in the wrong material
use new abrasive wheel; observe sepa
-
rating layers of various materials
1)
STIHL recommends STIHL servicing dealers
