![background image](http://html1.mh-extra.com/html/stihl/4137-series/4137-series_manual_1379216031.webp)
30
Series 4137 Components - HT
:
Take the slide (1) out of the guide
and remove the throttle cable.
VA
249RA104
1
:
Lift the interlock lever (1) slightly,
and turn it sideways until the
torsion spring (2) is relaxed.
:
Pull the interlock lever (1) off the
pivot.
VA
936RA253
1
2
:
Remove the torsion spring
(arrow).
Install in the reverse sequence.
– Make sure the throttle cable and
protective tube are correctly
positioned.
– Tighten down the screws firmly,
– Open the throttle wide several
times so that the slide
automatically takes up any slack
in the throttle cable.
– Remove the interlock lever,
:
Pull the slide control off the
handle molding.
:
Take out the clamp screws
(arrows).
– Remove the handle molding from
the drive tube.
VA
249RA105
:
Remove the torsion spring
(arrow) from the pivot.
936RA438
VA
8.3.2
Contact/Detent Spring