Stihl 4137 Series, Manual, Page: 32 / 58

31 Series 4137 Components - HT
:
Take out the stop switch (1).
Install in the reverse sequence.
:
Position the switch’s wire in the
channel (2).
936RA439
VA
2
1
Install all other parts in the reverse
sequence.
– Remove the shroud,
b
5.1
:
Disconnect the throttle cable
nipple (1) from the slotted pin (2)
on the carburetor’s throttle lever.
– Take the throttle cable out of the
throttle trigger,
b
8.3.1
VA
936RA150
2
1
:
Pull the throttle cable out of the
tensioner.
VA
936RA117
:
Pull the short circuit wire’s
connector (1) off the tag (2).
:
Pull the connector (3) off the
tag (4).
Install in the reverse sequence.
VA
936RA376
3
2
4
1
8.3.3 Throttle Cable