Stevens AeroModel SkyBoy 600, Manual

Page: 51 / 55

Finishing Cont.
☐ Mark location of holes with a fine tip marker.
☐ Remove windscreen and drill pilot holes with
a 1/32 in. drill bit. Harden holes with a drop of
thin CA.
☐
Peel protective coating from windscreen.
☐ Mount windscreen with provided 0 x 3/16 in.
screws.
☐ ☐ Open holes in bottom of ailerons and
insert a control horn [DUB936]. Bond
with thin CA.
☐ ☐ Attach aileron with a strip of 3/4 in. clear
tape, leaving a 1/32 in. gap all the way
around aileron.
SkyBoy 600 © 2010 Stevens AeroModel all rights reserved. Page 51 of 55
Tape