Stevens AeroModel SkyBoy 600, Manual

Page: 26 / 55

Fuselage Cont.
☐ ☐ Gently squeeze the rear of the stringers
against the F12’s and bond in place.
☐
Repeat previous steps marked
☐ ☐
to install
stringers 2 and 3.
☐ Fit and bond a 4-1/2 in.length of 3/16 in.
square balsa in slots in the top of F6a and
F9a. Do not allow piece to extend into pocket
for vertical stabilizer.
☐ Align extreme end of fuselage sides and bond
with medium CA.
☐
Bond all mating surfaces in the rear fuselage
with medium CA.
☐ Sand forward ends of stringers flush with F6a
SkyBoy 600 © 2010 Stevens AeroModel all rights reserved. Page 26 of 55
F12
Stringer 1
2
3
3/16” square
Balsa
F6a
F9a
F6a
Stringer 2 stands
proud of 1 and 3