Stevens AeroModel SkyBoy 600, Manual

Page: 4 / 55

Required Electronics
(Available at StevensAero.com)
☐
4 Channel radio and micro receiver. We suggest the Spektrum DX6i and AR500 receiver.
☐
2 - HS-82MG servos
☐
2 - HS-65HB servos
☐
2 - 12” Servo Extensions
☐
SA Sport BL.10 Motor [SUPA2418-8]
For 11.1V power system use:
☐
Thunderbird 36 36Amp ESC [CSETB36]
☐
11x5.5E Propeller [APC12060E]
☐
Hyperion G3 7.4V 2100mAh 3 cell LiPo Battery [HP-LG325-2100-3S]
For 7.4V power system use:
☐
SA Sport - 30Amp ESC [SUP30AESC]
☐
12x6SF Propeller [APC12060SF]
☐
Hyperion G3 7.4V 2100mAh 2 cell LiPo Battery [HP-LG325-2100-2S]
SkyBoy 600 © 2010 Stevens AeroModel all rights reserved. Page 4 of 55
Required Building Supplies and Tools
☐
Pair 4-1/2 in. Big Lite Wheels [DAV5740]
☐
1 oz. Medium CA Glue
☐
1/2 oz. Thick CA Glue
☐
1 oz. Thin CA Glue
☐
CA glue accelerator (kicker)
☐
Balsa filler
☐
Hobby Knife with ample supply of #11 blades
☐
Sanding block with 400 and 600 grit paper
☐
Heat Gun and Covering Iron
☐
Small Needle Nose Pliers
☐
1 in. x 12 in. length sticky back velcro
☐
3/4 in. wide clear tape
☐
2 Roll AeroLITE (solite)
☐
1 Roll AeroTRIM (solartrim)
Suggested Building Supplies
☐
CA glue de-bonder
☐
Long sanding bar
☐
Razor Plane
☐
Low Tack Painters Masking Tape