Stevens AeroModel SkyBoy 600, Manual

Page: 32 / 55

Fuselage Cont.
☐ Insert another 18 in. length of pushrod
housing through the forward hole in the LEFT
fuselage side.
☐
Cross over previous pushrod housing, then
through the inner hole on the RIGHT side of
F9.
☐ Pass the housing through the RIGHT holes in
F6 and F5, leaving 1/8 in. extending beyond
F5. Bond at each former and fuselage exit.
☐ Trim pushrod housings flush with fuselage
sides.
☐ Final sand your fuselage. Round the nose
to a pleasing shape, and round off the edges
of the fuselage, leaving the wing saddle area
square.
SkyBoy 600 © 2010 Stevens AeroModel all rights reserved. Page 32 of 55
Bottom View
Bottom View
Bottom View
F5
F6
Left Side
Right
Right Side
Trim