Stevens AeroModel SkyBoy 600, Manual

Page: 28 / 55

Fuselage Cont.
☐ Fit and bond catches on F3 and F8 within
hatch area.
☐
Nose: Tab and bond part N1 into F2 and
onto motor mount.
☐
Align N2 within etched box on N1. Remove
N2, coat N1 with medium CA and replace N2.
☐ Repeat process with parts N3 through N6,
creating a “wedding cake” that will later be
shaped into some pleasing curves.
☐ Fit and bond hardwood landing gear mount in
slots in fuselage doubler. The groove should
line up with the slots in the fuselage sides.
☐ Fit and bond F14 to F3, overlapping landing
gear mount, but not the groove.
SkyBoy 600 © 2010 Stevens AeroModel all rights reserved. Page 28 of 55
F8
N2
N1
F2
F14
Top View
Top View
Top View
Bottom View
Bottom View