Final Assembly Cont.
☐
Cut pushrod 1/2 in. over length and secure
through E/Z Connector at bellcrank. Ensure
bellcrank and elevator are in neutral position
then snug screw at E/Z Connector.
☐
Mount motor with supplied #2 1/4” screws.
☐
Pass a 6 in. length of 1/2 in. wide velcro
battery safety strap through slots in motor
mount and fuselage.
☐
Strap ends should extend equally through
fuselage.
☐
Install adhesive backed velcro (not supplied)
behind motor to retain battery.
☐
Another patch of velcro near the leading and
trailing edges of the wing will secure the
speed control and timer.
RingRat 250 © 2010 Stevens AeroModel all rights reserved.
Page 25 of 29