Wing Construction Cont.
☐ ☐
Dry fit
left
wing tip assembly to
left
side of
wing at trailing edge.
☐ ☐
Carefully nest leading edge stock within
slot at front of wing tip.
☐ ☐
With wing tip fit flush to rib R4, leading
edge, and trailing edge, bond with
medium CA.
☐
Build
right
wing tip. Assemble and bond parts
TR1a and TR1b to form TR1. Repeat
process to create TR2 from TR2a/b and TR3
from TR3a/b.
Align and bond TR2 atop TR1 and TR3 atop
TR2 using thick CA.
Now, glue two (2) quarters in slot in right wing
tip for tip weight (about 11.5g of weight).
☐
Repeat prior
☐
☐
steps to bond
right
wing tip
to
right
side of wing assembly.
RingRat 250 © 2010 Stevens AeroModel all rights reserved.
Page 11 of 29