Wing Construction Cont.
☐
From the 3 in. length of 1/8 in. dia. nylon
tubing cut two 1-1/4 in. lengths. Install cut
tubing centered within each of the two
channels in the center of the left wing tip.
☐
Optional.
To move CG aft for better stunting,
battery may be mounted in the wing, install a
6 in. length of 1/2 in. wide velcro at this time.
Velcro strap is installed through slots in ply
support from
top
of wing
.
☐
Fasten strap to itself to keep it out of the way
while covering the wing.
Strap may be easily
removed later, but can not be installed after
wing is covered.
RingRat 250 © 2010 Stevens AeroModel all rights reserved.
Page 15 of 29