STERWINS 40VPS2-24.1, Assemby - Use - Maintenance Manual, Page: 355 / 379

355
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN
6. WINTERING
Illustration 6.1 to 6.5
Plug out the battery from the power tool.
Before long storage please ensure the battery charge fi t to instructions provided on battery instruction
manual.
Follow all instructions given on chapter storage below. We recommend using the original
package for storage or covering the product with a suitable cloth or enclosure to protect it against dust.
7. STORAGE
Only store the machine and the battery in a clean, dry, ventilated place with a temperature range of 4°C
to 24°C. Cover it in order to provide added protection. We recommend using the original package for
storage or covering the product with a suitable cloth or enclosure to protect it against dust. Be sure to
secure the unit while transporting
7.1 STORE THE MACHINE
Illustration 6.5
Plug out the battery from the power tool and make sure that all moving parts have come to a complete
stop. Attach the guide bar sleeve. Examine the unit thoroughly for worn, loose or damaged parts. Clean
the unit before storing. Do not expose the product to sunlight. Make sure the product is always protected
from cold and humidity.
7.2 STORE THE LITHIUM BATTERIES
Please make sure that the battery power level is as recommended in the battery instruction manual.
Please refer to the battery instruction manual for further details.
8. MAINTENANCE
DANGER! Risk of injury due to electric shock.
Remove the battery pack and make sure that all moving parts
have come to a complete stop before adjusting, inspecting,
cleaning or storing the product.
8.1 CLEANING
Illustration 5.2
Keep all safety devices, air vents, and motor housing free of debris and dirt. Wipe down the equipment
with a cloth and/or compressed air. It is highly suggested that you clean the device after every use.
Do not use cleaning agents, as these can attack the plastic and weaken the structural integrity of the pole
saw. If the pole saw is not used for an extended period of time, remove the chain oil from the tank. Briefl y
place the chain and the guide bar in an oil bath and then wrap in oil paper to dry.
8.2 REPLACEMENT
Illustration 5.1
WARNING! When handling saw chains, always wear protective
gloves.