Steris HarmonyAIR G Series, Operator'S Manual

Page: 48 / 60

5-2
10043124
Operator Manual Operator Troubleshooting
3. Light does not turn on. Possible malfunction(s) at wall/canopy control –
check circuit breakers and turn ON if tripped to
OFF. (See also
S
ECTION
5.2, W
ALL
C
ONTROL
F
AULTS
, P
AGE
5-3 .)
4. Poor light pattern. Dirt/debris may be inside lighthead. Refer
problem to qualified STERIS or STERIS-trained
service technician.
5. Light pattern does not change. Verifiy that lighthead is an adjustable pattern
model.
If an adjustable pattern model, refer problem to
qualified STERIS or STERIS-trained service
technician.
6. Monitor does not operate as expected. Refer to user manual supplied with monitor.
7. Poor video image quality. Restore camera default settings by turning
camera OFF and then back ON at wall control.
8. Poor light color or intensity. Refer problem to qualified STERIS or STERIS-
trained service technician.
Table 5-1. Operator Troubleshooting (Continued)
NOTE: Read through S
ECTION
6, M
AINTENANCE
, before attempting any troubleshooting activity.
Problem Possible Cause and/or Correction