Steris HarmonyAIR G Series, Operator'S Manual

Page: 13 / 60

1-3
Safety Precautions Operator Manual 10043124
WARNING – BIOHAZARD:
WARNING – DISPOSAL HAZARD:
WARNING – SHOCK AND BURN HAZARD:
WARNING – EXPLOSION HAZARD:
WARNING – ELECTRIC SHOCK HAZARD:
WARNING – PINCHING HAZARD:
Sterile disposable covers for handles and camera are intended for single use only.
Universal precautions must be observed when disposing of any single use disposable item.
This product contains materials which may require disposal through appropriately licensed and permitted
hazardous waste management firms. The materials listed in S
ECTION
8 are contained within the
HarmonyAIR Surgical Lighting System G Series. When disposing of the lighting fixture or its parts,
ensure proper disposal of hazardous and other regulated waste in compliance with national, state and
local WEEE/RoHs regulations.
Disconnect all utilities to lighting fixture before servicing. Do not install the lighting fixture unless all
utilities have been properly locked out. Always follow OSHA Lockout-Tagout and electrical safety-related
work practice standards.
Do not use this lighting system in the presence of flammable anesthetics.
Do not remove covers or perform service other than as described in this operator manual. Refer servicing
to qualified service personnel.
Do not remove wall control covers. Servicing must be performed by qualified service personnel.
The OFF position on the system ON/OFF touch pad of the wall control turns off control to camera and
lightheads, but system is still energized. This mode is referred to as STANDBY, and the ON/OFF LED
flashes once per second while system is in this mode.
The ON/OFF switch under the canopy only removes power from the load side of the system. Any system
wiring located between this switch and the utility junction box is still energized.
Pinch points are created during extreme articulation of the suspension system. Do not place hands on or
near the suspension knuckle during lighthead articulations.
!
!
!
!
!
!
!
!
!
!