Steris HarmonyAIR G Series, Operator'S Manual

Page: 35 / 60

3-11
Operating Instructions Operator Manual 10043124
3.6 Monitor Arms The HarmonyAIR Surgical Lighting System G Series can be
equipped with one or two monitor support arms.
Monitor arms can be included in the HarmonyAIR Surgical Lighting
System G Series either as the uppermost arm on the central spindle,
or upper- and lower-most arms on the central spindle.
Monitor arms are capable of the following articulations: (1) rotate
320° at the central spindle; (2) rotate 320° at the horizontal extension
arm; (3) rotate 315° at the yoke transition; (4) move up by pivoting at
spring arm knuckle 45° up; move down by pivoting at spring arm
knuckle 50° down. Flat panel monitor (FPM) yoke tilts (5) forward 15°
or backward 90° in yoke. (6) FPM yoke tilts 10° up or down. See
Figure 3-8 .
• Refer to separate operating instructions supplied with the
monitor.
• Input signals to monitors can be routed through the suspension
wiring from an external video source (not provided by STERIS).
Figure 3-8. HarmonyAIR Surgical Lighting System G Series Monitor Arm
1
3
2
4
5
5
6
WARNING – PERSONAL
INJURY AND/OR EQUIPMENT
DAMAGE HAZARD: Flat Panel
Monitor arm uses adjustable
tension force to support
equipment weight. Do not
remove monitor from the arm
unless the arm has been
locked in place by a trained
and authorized technician.
!