Stereotaxis Niobe PM3.1 Installation Verification And Testing Download Page 46

Page: 46 / 91

Document No.: 985-002307
Revision: D
EffectiveDate:07/24/2012

drive & Vdrive Duo

Installation Test

and Verification Procedure

Page 2 of 19

WARNING: This is a revision controlled document. Verify revision is correct prior to use

Stereotaxis, Inc.

Confidential

PURPOSE:

•

The purpose of this document is to provide instructions required to verify the proper
installation of the equipment in order to prepare the equipment for release to the user.

SCOPE:

•

This procedure applies to verifying the proper installation of the Vdrive and Vdrive
Duo for Stereotaxis Inc service personnel.

APPLICABLE DOCUMENTS:

•

001-002307-1

BOM, Vdrive System

•

001-002307-2

BOM, Vdrive Duo System

•

907-002307

RMS Interconnect Diagram

•

986-002307

RMS Shipping Instructions

•

HDW-0210

RMS Installation Procedure

•

001

002542-1

Vdrive

™/Variable Loop Disposable Set

•

HDW-295

Vdrive User Guide

DEFINITIONS AND ACRONYMS:

•

WI Work Instructions

•

ID Inside Diameter

•

(X) Quantity

PRECONDITIONS

•

Navigant 4.0 or higher software has been installed and verified.

•

The Vdrive or Vdrive Duo has been installed by completing the 997-002307 (Latest
Revision) RMS Installation Procedure.

Summary of Contents for Niobe PM3.1




























































































Search results

Summary of Contents for Niobe PM3.1

Reviews:

Stereotaxis Niobe PM3.1, Installation Verification And Testing, Page: 46 / 91

Search results

Summary of Contents for Niobe PM3.1

Reviews: