Rigging Report
Design Organ. No. EB 11
Product. Organ. No. I - B 40
GmbH & Co. KG
STEMME S10-VT
Page 1
(of 2)
prepared:
Sign
checked:
Sign
Date:
supersedes issue:
Dube
Montag
08.10.1999
Serial No.:
11-
Registration:
Order No.:
Drawing Up Reason:
Conformity
Inspection
Inspection. Date of Finding Report: ____________________________________________
Other: ___________________________________________________________________
1. Angle of Incidence
The following rated values and actual values of the angles of incidence apply to the upper edge of a wedge 1000:84 on
the straight part of the tail cone, with its vertex in flight direction.
Inspection of the angle of incidence is required for the Conformity Inspection and an Inspection following a heavy
landing, furthermore after Major Repair, if wing and/or tail mountings have been affected.
Wing Chord:
+ 2.0° ± 0.2°
°
Horizontal Tail Chord:
-2.0° ± 0.2°
°
Secondary Condition: The difference of actual angles of incidence wing/horizontal tail must be
between 3.7° and 4.4°
°
2. Control Surface Deflections
Positive values (+) indicate full control surface deflections downward or left, negative Values (-) indicate deflections
upward or right.
Elevator:
Measuring point is trailing edge of inner rib of elevator (140 mm / 5.51 in. from hinge line).
Full Deflection
- 48
+2
/
-5
mm
(-1.89
+0.08
/
-0.2
in.)
[mm / in.]*
+ 48
+5
/
-2
mm
(+1.89
+0.2
/
-0.08
in.)
[mm / in.]*
Rudder:
Measuring point is lower rear corner of control surface (420 mm / 16.5 in. from hinge line)
Full Deflection:
+220 ± 15 mm
(+8.7 ± 0.6 in.)
[mm / in.]* -220 ± 15 mm
(-8.7 ± 0.6 in.)
[mm / in.]*
Wing Flaps and Ailerons:
Flap
Lever
Control
Stick
Measurement points:
1) aileron: inner rib of the control surface, 163 mm / 6.42 in. from hinge line.
2) wing flap: inner rib of the control surface, 175 mm / 6.89 in. from hinge line.
Position Position
left aileron
left wing flap
right wing flap
right aileron
mm (in.)
[mm / in.]*
mm (in.)
[mm / in.]*
mm (in.)
[mm / in.]*
mm (in.)
[mm / in.]*
- 10°
neutral
-31 ± 4
(-1.22 ± 0.16)
-31 ± 4
(-1.22 ± 0.16)
- 5°
neutral
-15 ± 4
(-0.6 ± 0.16)
-15 ± 4
(-0.6 ± 0.16)
0
left
neutral
right
-48 ± 4
(-1.89 ± 0.16)
0 ± 2
(0 ± 0.08)
+27 ± 3
(1.06 ±0.12)
0 ± 2
(0 ± 0.08)
0 ± 2
(0 ± 0.08)
+27 ± 3
(+1.06 ± 0.12)
0 ± 2
(0 ± 0.08)
-48 ± 4
(-1.89 ±0.16)
+ 5°
neutral
+15 ± 4
(+0.6 ± 0.16)
+15 ± 4
(+0.6 ± 0.16)
+ 10°
neutral
+31 ± 4
(+1.22 ± 0.16)
+31 ± 4
(+1.22 ± 0.16)
L (+16°)
neutral
+51 ± 4
(+2 ± 0.16)
+51 ± 4
(+2 ± 0.16)
*Units: delete as applicable
