Starrett PKG08806-UMDFG, User Manual

Page: 12 / 36

12 PKG08806-UMDFG
ENGLISH
3.2.6 SOFTKEY LABELS
The bottom of the display has three targets that are mapped to the three
keys on the keypad.
The right- and left-most keys have dynamic functions that may change
based on the test operation being performed. These targets may also be
assigned specific functions in the SETUP MENU for KEYS.
The center target is reserved for access to the SETUP MENU.
3.2.7 OPERATING MODES
Symbols are used to depict the operating mode of the force gage. The
operating mode is a setting in the SETUP MENU.
3.2.8 UNITS OF MEASURE
The units of measure is displayed with the associated result. Load
results may use ozf, gf, lbf, kgf, or N. Distance results may use in (inch)
or mm (millimeter).
3.2.9 DISPLAY ORIENTATION (FLIP)
The display orientation may be changed in the SETUP MENU. In
applications where the load cell stem needs to point downward, it
may be necessary to "flip the orientation" of the display so rather than
reading right-side up, the display reads right-side down.
Modes and Symbols
Units
lbf
N
kgf
ozf
gf
User
PSI
Softkey Labels
Symbol Type Description
Send Exports result or memory via RS232 or Bluetooth
lbf Units Changes current unit of measure
q 4 Save Saves current results to gage memory and shows number of records saved
Mode Shows current mode and allows modes to be changed
∑ Stats Displays statistics for results saved in memory
Modes
Peak Compression
Real Time
Peak Tension
u
Units of Measure
Normal Display View
Flip Display View