Starrett PKG08806-UMDFG, User Manual

Page: 9 / 36

PKG08806-UMDFG 9
ENGLISH
DIMENSIONS
3.0 FORCE GAGE FUNDAMENTALS
3.1 KEYPAD AND NAVIGATION
The DFG keypad is multi-functional. There are four keys.
Each is described below.
3.1.1 ON/OFF/MENU KEY
This key is used to power the gage on/off. Press to power the gage on. Press and hold
for 3 seconds to power the gage off.
This key is also used to access the Setup Menu. When the gage is powered ON, press
to access the Setup Menu.
This key is also used to navigate UP when in the Setup Menu. p
3.1.2 ZERO KEY
This key is used to zero the displayed values. Press to zero load and if connected to the
FMM Digital Force Tester, zero distance.
This key is also used to navigate DOWN when in the Setup Menu.
q
3.1.3 SOFTKEY 1
This is the left arrow key. It is used to move out of a setup when in the Setup Menu. t
This key may also be mapped to a specific function.
The Setup Menu has a Key setup function where you may assign how Softkey 1 performs.
For example, you can assign a SAVE function to the key. When pressed, the measured
values are "saved" to memory.
3.1.4 SOFTKEY 2
This is the right arrow key. It is used to move in to a setup when in the Setup Menu. u
Like the Softkey 1, it also may be mapped to a specific function. For example, you can
assign a MODE function to the key. Pressing the key can change the operating modes of the
gage. You can switch from Real Time to Peak Tension by pressing Softkey 2.
Shown: Keypad mapping with display in NORMAL format
0.91 (23.0)
3.30 (83.8)
1.63 (41.3)
2.00 (50.8)
2.00 (50.8)
M4x0.7-6H  0.30 4x
Ø0.20  0.18
0.55 (14.0)
0.50 (12.7)
A
A
1.70 (43.2)
0.31 (8.0)
7.50 (190.5)
2.25 (57.2)
Thread