Starrett PKG08806-UMDFG, User Manual

Page: 28 / 36

28 PKG08806-UMDFG
ENGLISH
5.6.2.1 USING AUTO OFF
You may configure the force gage to automatically power OFF after an
elapsed, specified time duration where the following conditions occur:
• there was no load applied to the load cell sensor
• there was no keypress applied to the keypad
The default is 5 Minutes.
5.6.2.2 ADJUSTING BACKLIGHT
The force gage features and adjustable backlight. This is useful to
counter issues with low or high ambient light conditions.
The force gage default is 20%. This means the backlight is displayed at
20% of its full intensity/brightness.
NOTE
Battery life is affected by the backlight setting. More power is consumed with a higher
backlight setting. At 20% backlight, and normal use, the force gage can provide over 30
hours of use.
Settings
Display
Backlight
Auto Off 60 Min
40%
Normal
Period
Flip Display
Radix
Settings
Display
Backlight
20%
40%
60%
80%
Settings
Display
Backlight
40%
60%
80%
100%
Press
q
Move down to DISPLAY
Press q Move down to AUTO OFF
Press u Select Time Duration needed
Press
t
Move out of AUTO OFF
Press
t
Move out of DISPLAY
Press
q
Move down to DISPLAY
Press q Move down to BACKLIGHT
Press
u
Select Backlight intensity needed
Press
t
Move out of BACKLIGHT
Press
t
Move out of DISPLAY
Settings
Display
Backlight
Auto Off 5 Min
40%
Normal
Period
Flip Display
Radix
Settings
Display
Auto Off
5 Min
15 Min
30 Min
60 Min
Display Automatic Power Off Setup
Display Backlight Adjustment