Starrett PKG08806-UMDFG, User Manual

Page: 20 / 36

20 PKG08806-UMDFG
ENGLISH
5.1.2 PEAK COMPRESSION
The PEAK COMPRESSION MODE displays the maximum load achieved
during a compression (Push) direction.
The primary display shows the results for the maximum achieved load in
the compression direction, i.e. the peak compression result.
The secondary display shows the Real Time result or what is currently
being applied to the load cell.
The PEAK COMPRESSION MODE is depicted by this symbol:
5.1.3 PEAK TENSION
The PEAK TENSION MODE displays the maximum load achieved during
a tensile (Pull) direction.
The primary display shows the results for the maximum achieved load
in the tensile direction, i.e. the peak tension result.
The secondary display shows the Real Time result or what is currently
being applied to the load cell.
The PEAK TENSION MODE is depicted by this symbol:
5.2 UNITS OF MEASURE
Set the units of measure as follows:
5.3 MEMORY SETUP
The DFG has memory for saving up to 50 results. Results may be saved
manually, by pressing a softkey or automatically at the completion of a test.
Results in memory can be displayed and used for statistics or exported
to an external device.
NOTE
Because results in memory are used for statistical calculations, all results in memory must
be of the same type. For example, saved results should be all tension results in order for
statistics to be calculated correctly.
21.10
21.06
7
lbf
lbf
7
22.29
19.24
Units
lbf
N
kgf
ozf
gf
Peak Compression Display
Peak Tension Display
Press p Select MENU
Press
u
Select UNITS
Press
u
Select the Unit needed
Press
t
Move out of Units
Press t Move out of Setup
Press
p
Select MENU
Press
q
Select MEMORY
Press
u
Select DISPLAY to view memory and Statistics
Press u Select CLEAR to erase ALL results from Memory
Press
u
Select EXPORT results to an external Device
Press
t
Move out of MEMORY
Units of Measure Setup Menu