Starrett PKG08806-UMDFG, User Manual

Page: 21 / 36

PKG08806-UMDFG 21
ENGLISH
5.3.1 DISPLAY MEMORY
You can view the results in memory using the Memory menu or by
mapping a softkey to STATS.
From the Memory setup, select Display to view the results in memory.
From the main menu:
The DFG will display the saved results in memory in the left column
while displaying the calculated statistics in the right column.
Press the center power key and zero key to navigate up/down to view
your results.
Press the X softkey to delete the highlighted result.
Press the Back softkey to move out of the Display Memory view.
Modes
Units
Real Time
lbf
1
Off
Memory
Tolerance
Keys
Settings
σ
lbf
1
2
50.59 50.59
55.69
45.398
22.699
X /
60.79
60.79
5.3.2 CLEAR MEMORY
Results in memory may be cleared individually or collectively. To clear
an individual result from memory, go to the STATS view. Select the
results you want to clear. Select the "X" (delete) key.
To clear all results from memory, go to the Memory setup and select
CLEAR. This will erase all results for the gage's memory.
5.3.3. EXPORT MEMORY
Use the SAVE feature to save results to memory. Results saved to
memory MUST be of the same type based on test mode or test type.
If you attempt to save a different result type with an existing result, the gage
will display a message requiring you to delete the results currently in memory.
5.3.4 EXPORT SAVED RESULTS
Results may be exported to a externally connected device, such as a
personal computer using the Send feature. You must map one of your
softkeys to SEND. Press the SEND key to transmit the result via RS232
to the connected device.
Memory
Display
Clear 0
Export
Display Memory view
Memory
Clear
Clear
Go Back
Clear Memory Setup
Memory
Display
Clear 3
Export
Export Memory Setup
N
124.35
124.35
3
SEND Softkey